| Manufacturer | Wagan Tech |
|---|---|
| Brand | Wagan |
| Model | 7 LITER PERSONAL FRIDGE/WARMER |
| Item Weight | 6.5 pounds |
| Product Dimensions | 12.5 x 6.75 x 12 inches |
| Item model number | 2577 |
| Is Discontinued By Manufacturer | No |
| Exterior | Painted |
| Manufacturer Part Number | 2577 |
| Lift Type | Heat, Cool, Off |
| Item Weight | 6.5 Pounds |
| Capacity | 7 Liters |
| Number Of Doors | 1 |
Additional Details
Small Business
Shop products from small business brands sold in Amazon’s store. Discover more about the small businesses partnering with Amazon and Amazon’s commitment to empowering them.
Small Business
This product is from a small business brand. Support small.
Customers also viewed these products
Page 1 of 1 Start overPage 1 of 1
From the manufacturer
7 Liter Personal Fridge/Warmer
|
|
|
|
|
|---|---|---|---|
Perfect For Enjoying Food and Drinks On the GoWagan Tech's 7 Liter Personal Fridge/Warmer is a great way to keep food and drinks cool or warm while on the road. Save time and money by avoiding stops for food and drinks while on the way to your destination. |
Easily Fits in Your VehicleThe included 6 foot long detachable 12 volt DC power cord is ideal for reaching the backseat passengers! Simply plug into your vehicle's 12v cigarette lighter outlet. |
Spacious Interior: 7 Liter CapacityThe 7 Liter Personal Fridge/Warmer is a great size for personal use while on the road. Perfect for a few drinks and snacks or leftovers from your favorite restaurant! Can fit up to 9 soda cans. Tall bottles fit inside too. |
Adjustable Carrying StrapThe built-in adjustable carrying strap is an ideal solution for transporting the 7 Liter personal fridge/warmer to and from your vehicle. |
Features
|
|
|
|
|
|---|---|---|---|
2 Built-in CupholdersAvoid spills and keep your beverages secure while you drive around. |
Padded Armrest On LidAnyone riding in the backseat of your vehicle can use the padded armrest on the unit's lid to make their ride more comfortable and enjoyable. |
Easy to Use ControlsUse the 3 position switch to select from warm, off, and cool settings. Cooling capacity is up to 40 degrees F below room temperature, or it can heat up to 140 degrees F. |
Recessed LidThe lid features a recessed portion that is perfect for tall bottles. |
Great for Road Trips
Convenient Size
DC Power Cable is included
Portable
|
|
|
|
|
|
|---|---|---|---|---|---|
| Wagan Tech Fridge/Warmer 6 Liter 2260 | Wagan Tech Fridge/Warmer 7 Liter 2577 | Wagan Tech Fridge/Warmer 10.5 Liter 2296 | Wagan Tech Fridge/Warmer 14 Liter 6214 | Wagan Tech Fridge/Warmer 24 Liter 6224 | |
|
|
|
|
|
|
|
| Customer Reviews |
128
|
826
|
— |
— |
— |
| Capacity | 6 Liters | 7 Liters | 10.5 Liters | 14 Liters | 24 Liters |
| Input Power | 12V DC | 12V DC | 12V DC | 12V DC | 12V DC |
| Consumption | 40 Watts | 48 Watts | 55 Watts | 48 Watts | 40 Watts |
| External Beverage Holders | ✓ | ✓ | ✓ | ✓ | - |
| Adjustable Carrying Strap | ✓ | ✓ | ✓ | ✓ | Plastic Carrying Handle |
| 12oz. Can Capacity (Internal) | 9 | 9 | 15 | 12 | 27 |
| Thermo-electric (CFC Free) | ✓ | ✓ | ✓ | ✓ | ✓ |
| Will Hold 2-Liter bottles and Wine Bottles | - | - | - | ✓ | ✓ |
| External Dimensions (inches): (L x W x H) | 12.5 x 7.5 x 10.5 | 12.5 x 6.75 x 11.75 | 17.5 x 7.5 x 12 | 19 x 10.25 x 12 | 11 x 16 x 16.5 |
| Internal dimensions (inches): (L x W x H) | 8.25 x 5.75 x 7.5 | 8.25 x 5.5 x 7.5 | 10.5 x 5.5 x 7.5 | 12 x 8.25 x 5.5 | 8.5 x 11.5 x 12.5 |
7 Liter 12v Personal Fridge/Warmer's Design
Specifications
- Maximum cooling capacity: 35°F to 40°F below room temperature
- Heats up to 140°F (60°C)
- CFC-free (no refrigerant)
- Holds up to nine 12oz. cans
- Accommodates taller bottles (under recessed portion of the lid)
- 2 built-in beverage holders on the lid
- Easy to use 3 position power switch (Cool>Off>Warm)
- 6 foot detachable 12 volt DC power cord
Gasket on Lid
The rubber gasket embedded in the lid helps to ensure a tight seal and keep the cold or heat inside with your food and/or beverages.
Recessed Lid
The recessed portion on the lid allows taller bottles to be placed inside the 7 Liter personal fridge/warmer.
Reviews with images
How to replace 80mm fan on this cooler
I've used this for about a year or more in my semi-truck, it runs 12-16 hours a day 5-6 days a week. maybe other people got a defective one because mine keeps water bottles ice cold, ice litterally forms inside the water bottles. You must run your AC if it's warm outside, that's the only way to get chilled drinks. If you run this in a super hot car of course it won't seem like it's working. The fan started to make noises so I took off the housing and replaced it with a 120mm fan because it's all I had at home. The stock fan is Shenzhen 80mm SM8025SH 12v 0.25 A, that's extremely high amperage for a 80mm fan so I think it's a high output fan, I couldn't find the exact fan, but the 120mm fan I used should be about the same CFM cubic feet per meter air flow. since it's a bigger fan it will be quieter because it should spin slower, that's how it usually is. I'll post pictures of how to replace the fan when it fails. cut the 2 black and red wires from the old fan, cut it near the fan so you have longer wires, on the 120mm fan theres 3 wires, it has an extra yellow wire, probably to sense the rpm on the motherboard, just don't use it. connect the red to red wires and black to black, positive and negative respectively. I had to cut and ugly hole in the side to make the monster fan fit. I used a hand jig saw, you can use aviation snips or anything that can cut plastic. use caution. here are the pics:instructions theres 4 philips screws on the side housing, remove them, cut wires on old fan, use + and - on new fan and splice into wires into the cooler, red to red, black to black. put everything back.the old fan is mounted to the housing via 4 philips screws but its hard to get to, use a skinny philips screwdriver and use wire cutters/ lexan scicors, etc to cut off the 4 corners at the top of the old fan so your screwdriver and unscrew it at a more vertical angle
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on February 10, 2016
I've used this for about a year or more in my semi-truck, it runs 12-16 hours a day 5-6 days a week. maybe other people got a defective one because mine keeps water bottles ice cold, ice litterally forms inside the water bottles. You must run your AC if it's warm outside, that's the only way to get chilled drinks. If you run this in a super hot car of course it won't seem like it's working. The fan started to make noises so I took off the housing and replaced it with a 120mm fan because it's all I had at home. The stock fan is Shenzhen 80mm SM8025SH 12v 0.25 A, that's extremely high amperage for a 80mm fan so I think it's a high output fan, I couldn't find the exact fan, but the 120mm fan I used should be about the same CFM cubic feet per meter air flow. since it's a bigger fan it will be quieter because it should spin slower, that's how it usually is. I'll post pictures of how to replace the fan when it fails. cut the 2 black and red wires from the old fan, cut it near the fan so you have longer wires, on the 120mm fan theres 3 wires, it has an extra yellow wire, probably to sense the rpm on the motherboard, just don't use it. connect the red to red wires and black to black, positive and negative respectively. I had to cut and ugly hole in the side to make the monster fan fit. I used a hand jig saw, you can use aviation snips or anything that can cut plastic. use caution. here are the pics:
instructions theres 4 philips screws on the side housing, remove them, cut wires on old fan, use + and - on new fan and splice into wires into the cooler, red to red, black to black. put everything back.
the old fan is mounted to the housing via 4 philips screws but its hard to get to, use a skinny philips screwdriver and use wire cutters/ lexan scicors, etc to cut off the 4 corners at the top of the old fan so your screwdriver and unscrew it at a more vertical angle
instructions theres 4 philips screws on the side housing, remove them, cut wires on old fan, use + and - on new fan and splice into wires into the cooler, red to red, black to black. put everything back.
the old fan is mounted to the housing via 4 philips screws but its hard to get to, use a skinny philips screwdriver and use wire cutters/ lexan scicors, etc to cut off the 4 corners at the top of the old fan so your screwdriver and unscrew it at a more vertical angle
Images in this review
Reviewed in the United States on May 20, 2016
Top reviews from other countries
ElectricMintz
Exactly as shown! It was a little small for ...
Reviewed in Canada on June 22, 2016